settings
 |
Slap Happy The slap-back delay is one of the most commonly used delay effects, giving a subtle thickening to the overall sound. It adds solid punch to power chords and depth to articulate solos. |
 |
Run to the Edge Need we say more. Start picking some eighth notes and hear the magic! |
 |
Vibro-Delay Classic long delay with light modulation gives an atomsphereic vibrato effect. |
 |
Sparkle & Shine Light, airy delay with a lush and ambient trail off. |
 |
Long and Liquid Heavier amount of classic delay that hangs in the air long enough to play off of. |
 |
Dark Side Classic delay and modulation warmth, reminiscent of classic tape delay sounds. |
 |
Rotating Speaker Rich, modulation delay that delivers the classic rotating speaker vibe. |
specifications
Type of Circuitry: Analog Bucket Brigade Devices (BBDs) supported by modern low-noise analog electronics. No microprocessors or digital signal processors.
Bypass: True bypass
Delay Range: 15ms to 600ms. Actual delay time indicated by flash rate of illuminated delay time knob.
Dry Gain: 1dB fixed
Wet Gain: Adjustable from muted to +3dB. At the highest blend settings, the first echo is actually louder than the dry signal.
Repeat Control Range: One repeat to runaway repeats
Modulation Rate Range: 0.2Hz to 4 Hz
Modulation Depth Range: Zero to “over the top”
Auxiliary Functions: Wet channel insert loop, allows external effects to be applied to only the wet signal. Also serves as a wet-only output for wet/dry stereo or studio use.
Dry Frequency Response: <-1dB @ 10 Hz and 100 kHz
Dry Distortion: 0.002% at 250 Hz, 1V RMS output
Dry Noise Floor: -100dBv at output, 400Hz to 20kHz with input unplugged
Wet Noise Floor: -90dBV at output, 400Hz to 20kHz
Input Impedance: 1 Meg (active); open (bypassed)
Output Impedance: 1K ohm
Power: Internal 9V battery or external 9V-18V regulated power supply.
Current Consumption: 11mA typical
Dimensions: Chassis size 2.61″ x 4.90″ x 1.45″ (W x L x H)
Weight: 0.8lb. without battery